Water Based Deck Adhesive
2.5L Coverage Approx: 10 – 12m2 on to dry timber
5L Coverage Approx: 20 – 22m2 on to dry timber
10L Coverage Approx: 40 – 44m2 on to dry timber
A Quick FAQ
We often have customers ask what the difference is between Bonding adhesive and Waterbased / Deck Adhesive.
Bonding adhesive is a much stronger adhesive which is used for bonding to most materials as well as wood and used around the edges of the EPDM, on any up-stands, bonding to brickwork etc where an effective and quick hold is required to keep the EPDM in place. Bonding adhesive is applied to both the EPDM and the surface.
Deck Adhesive / Waterbased Adhesive is more suited to wood and ply adhesion on the main area of the deck. The reasons why Waterbased / Deck is often used is because it is easy to lay, you can lay the EPDM straight onto it while it is still wet and it is also possible to correct mistakes shortly after the EPDM has been laid down up to 2-3 times if you find there is unwanted debris underneath due to it taking slightly longer than bonding to dry
This adhesive should be used on flat timber surfaces, not suitable for brickwork.
Apply even coat to timber deck using a 9″ emulsion roller.
Mate the two surfaces and follow with a brooming over the membrane to ensure proper bonding.
Avoid globules and puddles allow to tack off before mating.
For best results apply Permaroof Deck Adhesive to smooth, dry timber surface.
Use only when temperatures will not fall below freezing at any time 24 hours after mating with EPDM.
Keep container closed when not in use.
Do not allow this product to freeze.
Keep out of reach of children.
User determines suitability for intended use and assumes all risk and liability.
HEALTH HAZARD WARNINGS
May cause mild eye irritation. Avoid contact with eyes, skin and clothing.
Do not swallow
If swallowed seek medical attention.