Best Selling Fibreglass Products
These kits come included with the correct amount Resin, Topcoat, Fibreglass Mating, Hardener and includes a Mixing Chart.
Best Selling EPDM Products
EPDM Dormer roof kits where front edge has gutter and back edge adjoins a pitched roof.
EPDM Porch Roof Kits where the gutter is along the front edge and the back edge adjoins a house wall
Flat Roof Kits for extensions where the front edge has a gutter and the back edge is adjoining a house wall.
Roof Kits for free standing garages where the gutter runs along the long edge.
DIY Roofing Supplies
A family run company with many years of hands on experience in the industry, our product knowledge is second to none. DIY Roofing Supplies strive to merge great customer service with every product we sell.
We supply only the highest quality flat roofing supplies at the best trade prices possible.
Fibreglass flat roofing kits, Fibreglass roof edge trims, EPDM Flat Roofing Kits, Classic Bond Liquid Roof Coatings, Resitrix Self Adhesive EPDM, GRP Roofing Supplies, Wallbarn Green Roofing System and a whole load more.
If you cannot find what you are looking for then please do not hesitate to contact a member of our team on the details below. We are always happy to help.
Tel :01803 424003 | Text: 07845790600
Email : firstname.lastname@example.org
Why use our Fibreglass Roofing Kits?
Our Fibreglass Flat Roofing Kits/products are a modern solution for flat roofing, balconies, Walk Ways and much much more and if fitted correctly should last 25 years or more. Fibreglass is really very easy to use so its perfect for the DIY Or Trade but please don’t forget that we are here to help with any questions or problems that you may come across.
Why use our EPDM Flat Roofing Kits?
Our EPDM Flat Roofing Kits are really very easy to use so again perfect for the DIY or Trade Roofers. All of our EPDM products are ready to use straight from the tin with no mixing required. Our EPDM has a life expectancy of 50 years plus.
Why use our Liquid Rubber System?
Our Classic Bond Liquid System is an amazing product and again ready to use from the tin. If you have an old but structurally sound roof you can simply clean the roof off, then seal it giving you a water tight roof. It’s as easy as that.
If you are just about to start your Flat Roofing project and need help why not email or text a picture/ sketch and we can help you put a kit together and guide you through the installation.
... Don't forget your Trims!
For use with section A & B to provide a neat finish to both right & left external corners.
For use with sections D260 & or A200/B260 to Provides pre-formed left hand corners.
For use with section A200 & B260 to provide a neat finish to both right & left internal corners.
Shop the ClassicLiquid Range
The ClassicLiquid system is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer.
This 4 Litre ClassicLiquid Primer can be applied to many different substrates both porous and non porous and must be used prior to the use of ClassicLiquid Top Coats & Detailer.
Coverage rates will vary based on the existing roof porousity between 0.1 litres to 0.3 litres per square metre. Typically a semiporous surface will require 0.2 Litres / sqm meaning that this 4 litre tin will cover approximatey 20 square metres.
ClassicLiquid Self Adhesive Tape has been developed to seal board joints, in most substrates prior to the installation of the Classic-Liquid system.
The product can be used to seal joints in the roof substrate, walls, board joints, junctions between roof decks and roof edges and a variety of other uses.
One roll of tape is 100mm wide by 10 Lm (Linear Metres) Long
ClassicLiquid system is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer.
The ClassicLiquid TopCoat can be applied in different thicknesses for different guarantee periods. The minimum application rate is 1.5Kg/sqm meaning this 15Kg tin will cover approximately 10sqm For longer guarantees please use the coverage rates below:
10 year – 1.5Kg/sqm (15Kg = 10sqm)
15 year – 2.1Kg/sqm (15Kg = 7.2sqm)
20 year – 2.5Kg/sqm (15Kg = 6.0sqm)
20 year Balcony / Walkway – 2.5Kg/sqm + 300g/sqm in conjunction with Quartz Aggregate. (15Kg = 5.5sqm)
ClassicLiquid Walkway can be used in conjunction with Quartz Aggregate (0.4-0.8mm) to create a hard wearing, slip resistant coating over many surfaces, such as balconies and walkways.
Minimum coverage rate is 0.1ltr m2 per coat. This 4Kg tin will cover approximately 40 square metres
Drying time, 6-8 hours.